.png)
MT-500-1 Grounding Monitor & Detector
BHO Grounding Monitor can be used for real-time and continuous monitoring and control on anti-static wristbands. It can be used for real-time monitoring on the whole grounding system, so as to protect normal operation of grounding system in anti-static work area for one or two working staff(s). This product ensures 100% monitoring on the ESD status of the operators.
This product is fully in line with the standard ANSI / ESD S20.20 of American Electrostatic Discharge Association and the standard IEC-61340 of the European Electrical Overstress Association. For the electrostatic grounding in the electrostatic protection area (EPA), both these standards clearly require that the effective electrostatic grounding should be ensured, and Grounding Monitor should be used for real-time monitoring and alarm. It can ensures the reliability of grounding to prevent the damage of electrostatic.
Product Features
Specification
Instructions
Buy Online
1.1 This product uses the USA original chip, possessing high reliability and stability.
1.2 This product design with two type power
(1). With DC power adaptor -,, with safety-regulations-complied power supply. And it has passed a number of certifications and can be exported to a lot of countries.
(2). With a 9V battery, it can be used when there is no power outlet, and it can be moved at any time to check if the grounding point is good.
1.3 Deterioration design, if the anti-static wristband has failure, the power switch should be manually turned off.
1.4 Alarm sensitivity is easy to be adjusted, it is compatible with the vast majority of anti-static wristbands in market.
1.5 Monitor the operator’s ESD wrist strap or mat and grounding situation at any time, it will automatically and immediately alarm in case of abnormality.1.6 The good range of impedance value is less than < 1.38x10e6 Ohm [higher than this value, red light will on]